The Nasiol Suede Cloth is a suede cloth specifically developed for the application of ceramic coatings and nano coatings. It wraps around the Nasiol Applicator Block to ensure uniform and controlled product distribution on the paintwork, without marks, without waste, and with maximum precision.

What is it for?

The suede cloth is the direct contact element between the coating and the paintwork. The soft and absorbent texture of the suede allows the product to be deposited homogeneously, avoiding excessive accumulation in one area. Essential for a professional application of coatings like Nasiol NeoCoatX.

• Material: high-quality grey suede
• Dimensions: 10 x 10cm
• Weight: 200GSM
• Pack of 5 units
• Compatible with Nasiol Applicator Block
• Compatible with all Nasiol ceramic coatings and nano coatings
• Disposable after each application to prevent contamination

How to Use

Wrap the suede cloth around the Nasiol Applicator Block. Apply a few drops of the ceramic coating to the center of the cloth. Spread in linear cross movements, section by section of 40x40cm. Discard the cloth after each application session. View all Car Protection products.

Nasiol Magic APC 500 ml is a ready-to-use interior multi-purpose cleaner, developed for effective and safe cleaning of the car's interior.

Its advanced formula quickly removes dirt, stains, grease, and wear marks from plastics, vinyl, fabrics, and synthetic surfaces, without the need for dilution.

Ideal for regular maintenance or more intensive cleaning, it provides a clean and uniform finish without leaving sticky residues.

Suitable for dashboards, door panels, center consoles, vinyl, and synthetic upholstery.

Key Features

• Ready-to-use formula (no dilution)

• Removes stains, grease, and accumulated dirt

• Safe for plastics, vinyl, and fabrics

• Simple spray application

• Leaves no oily residue

• Ideal for regular interior maintenance

The NASIOL Glass Shield 50 ml is a high-performance hydrophobic coating developed for car windshields and windows.

It creates an invisible protective layer that makes water bead and roll off quickly, significantly improving visibility during heavy rain and reducing the need for windshield wipers.

Its nano-technology chemically bonds with the glass, offering chemical resistance and long-lasting protection against water, dirt, and environmental contaminants. Treated surfaces stay cleaner for longer and become much easier to maintain.

Ideal for those seeking greater safety, driving comfort, and prolonged protection.

Durability up to 2 years, depending on usage conditions.

Volume: 50 ml

Key Features

• High hydrophobic effect (rain repellent)

• Improves visibility in rain and bad weather

• Reduces wiper usage

• Easier to clean surface

• High chemical resistance

• Simple application

• Durability up to 2 years

Nasiol RapidShine is a high-performance, water-based quick detailer developed to instantly enhance shine, intensify colour, and provide a strong hydrophobic effect to the vehicle's surface.

Unlike traditional detailers, it can be applied directly to wet surfaces, making it ideal for immediate use after washing the car.

Its fast-curing formula creates a smooth, silky finish that repels water and contaminants, while offering an immediate boost in shine. Application is simple and efficient: spray and wipe with a microfibre cloth, with no need for lengthy drying or buffing processes.

Perfect for maintenance between washes or to reinforce surfaces already protected with ceramic coating, RapidShine provides up to 6 months of durability, ensuring a professional-level finish in seconds.

Volume

500 ml

Durability

Up to 6 months

Nasiol Heavy Cut Compound Blue is a heavy-cut polishing compound designed to remove deep scratches, sanding marks up to 1200 grit, and severe oxidation from painted surfaces. Its diminishing abrasive system ensures aggressive defect removal at the beginning of the process, progressively refining the paint to a smooth and uniform finish.

What is Heavy Cut Compound Blue used for?

It is the first step in a professional polishing process — it eliminates the most severe defects before moving on to a medium-cut compound or refining polish. Ideal for paintwork with deep scratches, intense oxidation, or sanding marks that a normal polish cannot remove.

• Removes deep scratches and severe oxidation
• Eliminates sanding marks up to 1200 grit
• Diminishing abrasive system — progressively refines
• Dust-free formula — cleaner working environment
• Silicone-free and filler-free
• Compatible with rotary and orbital machines
• Applicable on cars, motorcycles, aircraft, and trains
• 1kg packaging with dispenser

How to Use

Wash and decontaminate the vehicle before polishing. If necessary, use a clay bar to remove particles adhered to the paint. Protect rubber, plastic, and headlights with masking tape. Apply 3-4 pea-sized drops to a wool or heavy-cut foam pad. Use a rotary or orbital machine at low to medium speed with the cross-hatching method. Remove residue with a clean microfiber cloth. For a complete polishing process, move on to Nasiol ClearUb 305 Medium Cut, then to Nasiol ClearUb 505 Fine Cut, and finish with Nasiol ClearUb 705 Super Fine Cut. View all Car Polishing products.

Technical Specifications

• Weight: 1kg
• Cut Level: Heavy
• Compatible Sanding Level: Up to 1200 grit
• Gloss Rate: Good
• Storage: 15°C to 25°C, dry and ventilated place
• Shelf Life: 12 months after opening

Nasiol Heavy Cut Compound Red is a high-performance heavy-cut polishing compound designed to eliminate the toughest paint defects. Featuring advanced diminishing abrasive particles, it ensures powerful cutting action at the start of the process, progressively refining the surface for a smooth and even finish.

What is Heavy Cut Compound Red used for?

It is the first step in a professional polishing process — it removes deep scratches, sanding marks up to 1200 grit, and severe oxidation that a normal polish cannot remove. Ideal for paintwork in poor condition that requires intensive restoration before moving on to refinement stages.

• Removes deep scratches and severe oxidation
• Eliminates sanding marks up to 1200 grit
• Diminishing abrasive particles — progressive refinement
• Dust-free formula — cleaner work environment
• Silicone-free and filler-free
• Compatible with rotary and orbital machines
• Applicable to cars, motorcycles, aircraft, and trains
• 1kg packaging with dispenser

How to Use

Wash and decontaminate the vehicle before polishing. If necessary, use a clay bar to remove embedded particles from the paintwork. Protect rubber, plastics, and headlights with masking tape. Apply 3-4 pea-sized drops onto a wool pad or heavy-cut foam pad. Use a rotary or orbital machine at low to medium speed with the cross-hatch method. Remove residue with a clean microfiber cloth. For a complete polishing process, move on to Nasiol ClearUb 305 Medium Cut, then to Nasiol ClearUb 505 Fine Cut, and finish with Nasiol ClearUb 705 Super Fine Cut. View all Car Polishing products.

Technical Specifications

• Weight: 1kg
• Cutting level: Heavy
• Compatible grit level: Up to 1200 grit
• Gloss Rate: Good
• Storage: 15°C to 25°C, dry and ventilated place
• Shelf life: 12 months after opening

The Nasiol CleaRub 305 Medium Cut is a medium-cut polishing compound developed to correct intermediate defects in car paintwork.

Effectively removes:

• Moderate scratches

• Oxidation

• Sanding marks

• Intermediate swirls and holograms

Its progressive abrasive technology allows for controlled correction, balancing cutting power and finish quality.

The low-residue formula facilitates cleaning during the process, while the silicone-free composition ensures full compatibility with ceramic coatings, sealants, and waxes.

Ideal as an intermediate step in multi-stage polishing systems.

Key Features

• Medium cut for intermediate defects

• Removes oxidation and sanding marks

• Excellent balance between cut and finish

• Low residue generation

• Silicone-free formula

• Compatible with rotary and orbital polishers

  
  

  Nasiol Clearub Polishing System

  The Clearub line was developed to work as a progressive paint correction system:

  Heavy Cut: Clearub 105
  Fine Finish: Clearub 505
  Final Refinement / Jeweling: Clearub 705

  After complete correction, it is recommended:

  Nasiol Clean – Surface Preparation
  Ceramic Coating Application -  Nasiol ZR 53
  Annual Maintenance - Nasiol F2 MetalCoat

   

   

The Nasiol CleaRub 505 Fine Cut is a refining polishing compound, developed to remove fine scratches, swirls, and intermediate marks left by more aggressive cutting stages.

It provides:

• Excellent intermediate correction level

• Uniform finish and high gloss

• Surface ready for final stage or protection application

Its low-residue formula allows for a clean and efficient polishing process, while the silicone-free composition ensures full compatibility with sealants, waxes, and ceramic coatings.

Ideal as a second step in multi-stage polishing systems.

Main Features

• Fine cut for intermediate refining

• Removes swirls, holograms, and light scratches

• High gloss and excellent optical clarity

• Low residue generation

• Silicone-free formula

• Compatible with rotary and orbital machines

  
  

  Nasiol Clearub Polishing System

  The Clearub line was developed to work as a progressive paint correction system:

  Heavy Cut: Clearub 105
  Intermediate Polish: Clearub 305
  Final Refining / Jeweling: Clearub 705

  After complete correction, it is recommended:

  Nasiol Clean – Surface Preparation
  Ceramic Coating Application - Nasiol ZR 53
  Annual Maintenance - Nasiol F2 MetalCoat