The 3D ACA 500 X-Tra Cut is the most aggressive cutting compound in the ACA line, developed to remove severe paint defects with maximum speed and control.

Formulated with exclusive Alpha Ceramic Alumina (ACA) technology, it offers extreme cut with a more refined finish pattern than traditional high-cut compounds.

Severe Defect Correction

Effectively removes:

• Deep scratches
• Sanding marks
• Heavy swirls
• Heavy oxidation
• Severe clear coat defects

Ideal as a first step in demanding technical corrections.

Advanced ACA Technology

• Extremely fast cutting
• High-precision abrasives
• Low dust generation
• Easy wipe-off
• Excellent thermal control

Allows for greater productivity without compromising paint safety.

Body Shop Safe

• Silicone-free
• Filler-free
• Safe for repaints
• Compatible with modern clear coats

Delivers real correction, without masking defects.

Application

Can be used with:

• Wool pads
• Microfiber pads
• Foam cutting pads
• Rotary polisher
• Random orbital (DA) polisher

After cutting, finishing with ACA 520 or AAT 502 is recommended for maximum gloss.

Result

• Extreme cut
• Step reduction
• Ideal preparation for fine polishing
• Consistent professional performance

Product recommended for detailers and workshops that demand maximum correction power with premium technology.

3D Professional Correction System

For a complete technical result in automotive paint correction, the following professional sequence is recommended:

 Fine Finish:
 3D ACA 520 Professional Finish Polish

Cleaning Before Protection:
 3D Wipe Panel Wipe Surface Prep

 Final Protection:
 3D POXY Paint Sealant
or
 3D Ceramic Touch Spray Ceramic Coating

This system ensures efficient correction, deep finish, and maximum durability of protection.

The 3D ACA 510 is a professional high-cut abrasive compound, developed to remove severe paint defects with maximum efficiency and control.

Formulated with exclusive Alpha Ceramic Alumina (ACA) technology, it offers fast cutting, low dust generation, and a more refined finish compared to traditional heavy-cut compounds.

Efficient Correction of Severe Defects

Ideal for the first stage of professional correction, it allows removal of:

• Sanding marks P1500 or finer
• Deep scratches
• Severe swirls
• Oxidation
• Intense clear coat defects

Provides fast and consistent results even on demanding paints.

Advanced ACA Technology

Alpha Ceramic Alumina technology ensures:

• High-precision abrasives
• Fast and controlled cutting
• Low dust generation
• Easy product removal
• Excellent working time

Allows for greater productivity in body shops and car detailing centers.

Body Shop Safe

• Silicone-free
• No fillers (does not mask defects)
• Safe for refinishing environments

Compatible with all types of clear coat, including modern systems and hard clear coats.

Application

Can be used with:

• Wool pads
• Cutting foams
• Microfiber
• Rotary polisher
• Random orbital polisher (DA)

After cutting, it is recommended to refine with a finishing polish to achieve maximum shine.

Result

• Fast and consistent correction
• Reduction in the number of steps
• Ideal preparation for fine polishing

Product suitable for professional detailers and workshops that demand maximum performance and high-level technical finish.

Related Products

For best results in the complete paint correction and finishing process, the use of complementary products is recommended:

Recommended collection:
Car Polishing – complete solutions for paint correction and finishing
→ /collections/polimento-automovel

Complementary products:
3D ACA 520 – finishing polish for refining and hologram elimination
→ /products/3d-aca-520

3D Bead It Up – hydrophobic sealant for paint protection and shine after polishing
→ /products/3d-bead-it-up

Technical guide:
How to remove micro-scratches from car paint – complete step-by-step process
→ /blogs/detalhe-automovel/como-remover-micro-riscos-pintura-carro

The 3D ACA 520 is a professional finishing polish developed to eliminate holograms, micro-scratches, and light swirls, providing a high-gloss finish completely free of imperfections.

Formulated with exclusive Alpha Ceramic Alumina (ACA) technology, it offers controlled correction, excellent working time, and consistent results on soft or hard clear coats.

Precisely Removes

• Holograms
• Micro-scratches
• Buffer trails
• Light swirls
• Water spots
• Light oxidation

Ideal as the final step after compounding.

Advanced ACA Technology

• High-precision abrasives
• Fine cut and refined finish
• Zero dusting
• Reduced heat buildup
• Easy wipe-off

Maximizes D.O.I. (Distinction of Image), increasing paint depth and clarity.

Body Shop Safe

• Water-based
• Silicone-free
• Safe for paint shops
• Compatible with modern clear coats

Application

Can be used with:

• Rotary polisher
• Dual-action (DA) polisher
• Foam, wool, or microfiber pads

Final step before applying:

• Wax
• Sealant
• Ceramic coating

Product recommended for professional detailers and paint correction centers that demand a perfect finish and maximum gloss.

Previous Step – Initial Cut

For more severe defects such as deep scratches or sanding marks, it is recommended to start the process with:

3D ACA 500 X-Tra Cut – Extra Strong Cutting Compound

After the initial cut, finish with ACA 520 for maximum gloss and a hologram-free finish.

Nasiol Heavy Cut Compound Blue is a heavy-cut polishing compound designed to remove deep scratches, sanding marks up to 1200 grit, and severe oxidation from painted surfaces. Its diminishing abrasive system ensures aggressive defect removal at the beginning of the process, progressively refining the paint to a smooth and uniform finish.

What is Heavy Cut Compound Blue used for?

It is the first step in a professional polishing process — it eliminates the most severe defects before moving on to a medium-cut compound or refining polish. Ideal for paintwork with deep scratches, intense oxidation, or sanding marks that a normal polish cannot remove.

• Removes deep scratches and severe oxidation
• Eliminates sanding marks up to 1200 grit
• Diminishing abrasive system — progressively refines
• Dust-free formula — cleaner working environment
• Silicone-free and filler-free
• Compatible with rotary and orbital machines
• Applicable on cars, motorcycles, aircraft, and trains
• 1kg packaging with dispenser

How to Use

Wash and decontaminate the vehicle before polishing. If necessary, use a clay bar to remove particles adhered to the paint. Protect rubber, plastic, and headlights with masking tape. Apply 3-4 pea-sized drops to a wool or heavy-cut foam pad. Use a rotary or orbital machine at low to medium speed with the cross-hatching method. Remove residue with a clean microfiber cloth. For a complete polishing process, move on to Nasiol ClearUb 305 Medium Cut, then to Nasiol ClearUb 505 Fine Cut, and finish with Nasiol ClearUb 705 Super Fine Cut. View all Car Polishing products.

Technical Specifications

• Weight: 1kg
• Cut Level: Heavy
• Compatible Sanding Level: Up to 1200 grit
• Gloss Rate: Good
• Storage: 15°C to 25°C, dry and ventilated place
• Shelf Life: 12 months after opening

Nasiol Heavy Cut Compound Red is a high-performance heavy-cut polishing compound designed to eliminate the toughest paint defects. Featuring advanced diminishing abrasive particles, it ensures powerful cutting action at the start of the process, progressively refining the surface for a smooth and even finish.

What is Heavy Cut Compound Red used for?

It is the first step in a professional polishing process — it removes deep scratches, sanding marks up to 1200 grit, and severe oxidation that a normal polish cannot remove. Ideal for paintwork in poor condition that requires intensive restoration before moving on to refinement stages.

• Removes deep scratches and severe oxidation
• Eliminates sanding marks up to 1200 grit
• Diminishing abrasive particles — progressive refinement
• Dust-free formula — cleaner work environment
• Silicone-free and filler-free
• Compatible with rotary and orbital machines
• Applicable to cars, motorcycles, aircraft, and trains
• 1kg packaging with dispenser

How to Use

Wash and decontaminate the vehicle before polishing. If necessary, use a clay bar to remove embedded particles from the paintwork. Protect rubber, plastics, and headlights with masking tape. Apply 3-4 pea-sized drops onto a wool pad or heavy-cut foam pad. Use a rotary or orbital machine at low to medium speed with the cross-hatch method. Remove residue with a clean microfiber cloth. For a complete polishing process, move on to Nasiol ClearUb 305 Medium Cut, then to Nasiol ClearUb 505 Fine Cut, and finish with Nasiol ClearUb 705 Super Fine Cut. View all Car Polishing products.

Technical Specifications

• Weight: 1kg
• Cutting level: Heavy
• Compatible grit level: Up to 1200 grit
• Gloss Rate: Good
• Storage: 15°C to 25°C, dry and ventilated place
• Shelf life: 12 months after opening

The Nasiol CleaRub 305 Medium Cut is a medium-cut polishing compound developed to correct intermediate defects in car paintwork.

Effectively removes:

• Moderate scratches

• Oxidation

• Sanding marks

• Intermediate swirls and holograms

Its progressive abrasive technology allows for controlled correction, balancing cutting power and finish quality.

The low-residue formula facilitates cleaning during the process, while the silicone-free composition ensures full compatibility with ceramic coatings, sealants, and waxes.

Ideal as an intermediate step in multi-stage polishing systems.

Key Features

• Medium cut for intermediate defects

• Removes oxidation and sanding marks

• Excellent balance between cut and finish

• Low residue generation

• Silicone-free formula

• Compatible with rotary and orbital polishers

  
  

  Nasiol Clearub Polishing System

  The Clearub line was developed to work as a progressive paint correction system:

  Heavy Cut: Clearub 105
  Fine Finish: Clearub 505
  Final Refinement / Jeweling: Clearub 705

  After complete correction, it is recommended:

  Nasiol Clean – Surface Preparation
  Ceramic Coating Application -  Nasiol ZR 53
  Annual Maintenance - Nasiol F2 MetalCoat

   

   

The Nasiol CleaRub 505 Fine Cut is a refining polishing compound, developed to remove fine scratches, swirls, and intermediate marks left by more aggressive cutting stages.

It provides:

• Excellent intermediate correction level

• Uniform finish and high gloss

• Surface ready for final stage or protection application

Its low-residue formula allows for a clean and efficient polishing process, while the silicone-free composition ensures full compatibility with sealants, waxes, and ceramic coatings.

Ideal as a second step in multi-stage polishing systems.

Main Features

• Fine cut for intermediate refining

• Removes swirls, holograms, and light scratches

• High gloss and excellent optical clarity

• Low residue generation

• Silicone-free formula

• Compatible with rotary and orbital machines

  
  

  Nasiol Clearub Polishing System

  The Clearub line was developed to work as a progressive paint correction system:

  Heavy Cut: Clearub 105
  Intermediate Polish: Clearub 305
  Final Refining / Jeweling: Clearub 705

  After complete correction, it is recommended:

  Nasiol Clean – Surface Preparation
  Ceramic Coating Application - Nasiol ZR 53
  Annual Maintenance - Nasiol F2 MetalCoat

   

   

3D AAT 501 is a professional cutting compound developed for fast and efficient correction of severe defects in automotive paint.

Based on Advanced Abrasive Technology (AAT), it removes P1200 to P1500 sanding marks, deep scratches, swirls, and oxidation with high speed and control.

Fast and Consistent Cut

Effectively removes:

• P1200-P1500 sanding marks
• Deep scratches
• Severe swirls
• Heavy oxidation
• Clear coat defects

Ideal for high-volume and high-productivity environments.

Body Shop Safe

• Silicone-free
• Filler-free
• Safe for body shops
• Compatible with refinishing processes

Ensures real correction without masking defects.

Optimized Performance

• Low dust generation
• Long working time
• Easy wipe-off
• Compatible with soft and hard clear coats

Improves efficiency and reduces overall process time.

Application

Can be used with:

• Wool pads
• Foam cutting pads
• Rotary polisher
• Dual Action (DA) polisher

After compounding, finishing with 3D AAT 502 or ACA 520 is recommended for maximum gloss.

Result

• Fast correction
• Ideal preparation for fine polishing
• Consistent professional finish

This product is suitable for detailers and body shops seeking solid performance, productivity, and technical safety.