The RUPES BigFoot LHR15 MarkIII was created to tackle any detailing challenge. The ergonomic design allows for precise and comfortable paint correction, even on curved surfaces and hard-to-reach areas. The LHR15 MarkIII operates at a higher speed than the LHR21 MarkIII, offering equivalent correction with a backing plate diameter and orbit more suitable for curved or irregular surfaces.

Random Orbital Movement

The backing pad follows an orbit (the amplitude of which depends on the distance between the motor spindle's axis of rotation and the pad's central axis) and rotates freely on its own axis. The speed and direction of rotation vary due to the centrifugal force of the eccentric movement and friction with the surface. This random orbital movement represents the best balance between effectiveness and surface treatment quality.

Improved Ergonomics

The MarkIII's rubberized front grip ensures exceptional comfort and a non-slip surface for greater control. The rear grip also integrates rubberized surfaces for a better handling feel. Two strategically placed, non-marking tool rests ensure stability when the machine is not in use, protecting it from accidental impacts.

Electronic Speed Control

The new electronic regulator allows for easy adjustment of the polisher's maximum speed without needing to change hand positions. The larger dial is adjusted with a simple thumb movement, with highly visible numbering for more precise speed choices without interrupting work.

9-Meter Electrical Cable

The new 9-meter Heavy Duty cable ensures maximum power to the polisher, with safety and efficiency. The extra length eliminates the need for extensions when working around the vehicle.

Progressive Trigger

The new progressive trigger acts like an accelerator within the speed regulator's range, allowing for subtle adjustments and precise control without interrupting the polishing process.

Design

Every detail, such as the rubber support on the machine's body that keeps it stable when not in operation, results from meticulous research focused on maximum operator comfort.

What's included in the LUX Kit

• BigFoot LHR15 MarkIII Random Orbital Polisher (Ø125mm - Ø5"-15mm orbit) (LHR15III)
• D-A COARSE Polishing Compound 250ml (9.DACOARSE)
• D-A FINE Polishing Compound 250ml (9.DAFINE)
• UNO PROTECT One-Step Polish & Sealant 250ml (9.PROTECT)
• COARSE Wool Pad Ø130mm (9.XW130H)
• FINE Wool Pad Ø130mm (9.NW130H)
• D-A COARSE Foam Pad Ø130-150mm - Ø5"-6" (9.DA150H)
• D-A FINE Foam Pad Ø130-150mm - Ø5"-6" (9.DA150M)
• Blue Microfiber Cloth (9.BF9050)
• Yellow Microfiber Cloth (9.BF9060)
• White Microfiber Cloth (9.BF9070)
• Claw Pad (9.BF7001)
• Cable Clamp (9.Z1024)
• BigFoot Apron (9.Z868)
• Silver BigFoot Tool Bag (9.Z1169/BF)

With a 21mm orbit and a Ø150mm backing pad, the RUPES BigFoot LHR21 MarkIII random orbital polisher is the ideal tool for working on large surface areas. It allows the operator to achieve very high-quality finishes, even with a reduced number of passes, thanks to improved efficiency that guarantees more power and torque on any surface.

Improved Ergonomics

The MarkIII's rubberized front grip ensures exceptional comfort and a non-slip surface for greater control. The rear handle also integrates rubberized surfaces for a better feel. Two strategically placed, non-marking tool rests ensure stability when the machine is not in use, protecting it from accidental impacts.

Electronic Speed Control

The new electronic control allows for easy adjustment of the polisher's maximum speed without needing to change hand position. The larger dial is adjusted with a simple thumb movement, with highly visible numbering for more precise speed choices without interrupting work.

9-Meter Electrical Cable

The new 9-meter Heavy Duty cable ensures maximum power to the polisher, with safety and efficiency. The extra length avoids the need for extension cords when working around the vehicle.

Progressive Trigger

The new progressive trigger acts like an accelerator within the speed control range, allowing for subtle adjustments and precise control without interrupting the polishing process.

Design

Every detail, such as the rubber support on the machine body that keeps it stable when not in operation, results from meticulous research focused on maximum operator comfort.

With a 21mm orbit and a Ø150mm backing pad, the RUPES BigFoot LHR21 MarkIII random orbital polisher is the ideal tool for working on large surface areas. It allows the operator to achieve very high-quality finishes, even with a reduced number of passes, thanks to improved efficiency that ensures more power and torque on any surface.

Improved Ergonomics

The MarkIII's rubberized front grip ensures exceptional comfort and a non-slip surface for greater control. The rear handle also integrates rubberized surfaces for a better handling feel. Two non-marking and strategically placed tool rests ensure stability when the machine is not in use, protecting it from accidental impacts.

Electronic Speed Control

The new electronic speed control allows for easy adjustment of the polisher's maximum speed without the need to change hand positions. The larger dial is adjusted with a simple thumb movement, with high-visibility numbering for more precise speed choices without interrupting work.

9-Meter Power Cord

The new 9-meter Heavy Duty cord ensures maximum power to the polisher, with safety and efficiency. The extra length avoids the need for extension cords when working around the vehicle.

Progressive Trigger

The new progressive trigger acts as an accelerator within the speed regulator's range, allowing for subtle adjustments and precise control without interrupting the polishing process.

Design

Every detail, such as the rubber support on the machine's body that keeps it stable when not in operation, results from meticulous research focused on maximum operator comfort.

What's included in the BAS Kit

• BigFoot LHR21 MarkIII Random Orbital Polisher (Ø150mm - Ø6"-21mm orbit) (LHR21III)
• D-A COARSE Polishing Compound 250ml (9.DACOARSE)
• D-A FINE Polishing Compound 250ml (9.DAFINE)
• COARSE Wool Pad Ø160mm (9.NW160H)
• D-A FINE Foam Pad Ø150-180mm - Ø6"-7" (9.DA180M)
• Blue Microfiber Cloth (9.BF9050)
• Yellow Microfiber Cloth (9.BF9060)
• Cable Clamp (9.Z1024)

With a 21mm orbit and a Ø150mm backing pad, the RUPES BigFoot LHR21 MarkIII random orbital polisher is the ideal tool for working on large surface areas. It allows the operator to achieve very high-quality finishes, even with a reduced number of passes, thanks to improved efficiency that guarantees more power and torque on any surface.

Improved Ergonomics

The MarkIII's rubberised front grip ensures exceptional comfort and a non-slip surface for greater control. The rear handle also integrates rubberised surfaces for a better handling feel. Two strategically placed, non-marking tool rests ensure stability when the machine is not in use, protecting it from accidental impacts.

Electronic Speed Control

The new electronic speed control allows for easy adjustment of the polisher's maximum speed without needing to change hand positions. The larger dial is adjusted with a simple thumb movement, featuring high-visibility numbering for more precise speed choices without interrupting work.

9-Metre Power Cord

The new 9-metre Heavy Duty cable ensures maximum power to the polisher, with safety and efficiency. The extra length avoids the need for extensions when working around the vehicle.

Progressive Trigger

The new progressive trigger acts as an accelerator within the speed control range, allowing for subtle adjustments and precise control without interrupting the polishing process.

Design

Every detail, such as the rubber support on the machine's body that keeps it stable when not in operation, results from meticulous research focused on maximum operator comfort.

What's included in the LUX Kit

• BigFoot LHR21 MarkIII random orbital polisher (Ø150mm - Ø6"-21mm orbit) (LHR21III)
• D-A COARSE polishing compound 250ml (9.DACOARSE)
• D-A FINE polishing compound 250ml (9.DAFINE)
• UNO PROTECT One-Step Polish & Sealant 250ml (9.PROTECT)
• COARSE wool pad Ø160mm (9.XW160H)
• FINE wool pad Ø160mm (9.NW160M)
• D-A COARSE foam pad Ø150-180mm - Ø6"-7" (9.DA180H)
• D-A FINE foam pad Ø150-180mm - Ø6"-7" (9.DA180M)
• Blue microfibre cloth (9.BF9050)
• Yellow microfibre cloth (9.BF9060)
• White microfibre cloth (9.BF9070)
• Claw pad (9.BF7001)
• Cable clamp (9.Z1024)
• BigFoot apron (9.Z868)
• BigFoot silver tool bag (9.Z1169/BF)

The Ø15mm orbit and the Ø125mm RUPES backing pad make this random orbital polisher particularly suitable for curved surfaces. The LHR15ES's orbit, shorter than its "bigger sister" LHR21ES, is combined with a higher rotation, which gives the LHR15ES cutting power equivalent to the LHR21ES, despite the smaller orbit. With Ø130/150mm BigFoot foam pads, perfect balance, and vibration-free operation, the LHR15ES is a true gem and an essential item in any detailer's kit.

Random Orbital Movement

The backing pad follows an orbit (whose amplitude depends on the distance between the motor shaft's axis of rotation and the pad's central axis) and rotates freely on its own axis. The speed and direction of rotation vary due to the centrifugal force of the eccentric movement and friction with the surface. This random orbital movement represents the best balance between effectiveness and surface treatment quality.

Elegant Design

RUPES' R&D and Design departments have paid special attention to the design and ergonomics of BigFoot polishers. The perfectly balanced body, practical grip, quiet operation, and minimal vibration are some of the features that make BigFoot the most versatile and sought-after system on the market.

Anti-Rotation Shroud

The dual-function shroud protects the operator from moving parts and acts as a clutch for the backing pad, preventing additional stress on the foam pad when it is not in direct contact with the surface.

Electronic Speed Control

The speed regulator on the handle is practical and easy to use, and can be adjusted during operation without interrupting the polishing process.

Switch Lock

By pressing the button on the left side of the handle during polishing, the on/off switch is locked, allowing the operator to freely change hand positions while the tool is in operation.

Design

Attention to detail is not limited to the innovative and attractive design. Modern lines and exceptional technical quality combine with details resulting from meticulous research, focused on maximum operator comfort.

The Ø15mm orbit and the RUPES Ø125mm backing pad make this random orbital polisher especially suitable for curved surfaces. The LHR15ES's orbit, shorter than that of its "bigger sister" LHR21ES, is combined with a higher rotation, which gives the LHR15ES cutting power equivalent to the LHR21ES, despite the smaller orbit. With BigFoot Ø130/150mm foam pads, perfect balance, and vibration-free operation, the LHR15ES is a true gem and an essential item in any detailer's kit.

Random Orbital Movement

The backing pad follows an orbit (the amplitude of which depends on the distance between the rotation axis of the motor spindle and the central axis of the pad) and rotates freely on its own axis. The speed and direction of rotation vary due to the centrifugal force of the eccentric movement and friction with the surface. This random orbital movement represents the best balance between effectiveness and surface treatment quality.

Elegant Design

RUPES' R&D and Design departments have paid special attention to the design and ergonomics of BigFoot polishers. The perfectly balanced body, practical grip, quiet operation, and minimal vibration are some of the features that make BigFoot the most versatile and sought-after system on the market.

Anti-Spinning Protection

The dual-function protection shields the operator from moving parts and acts as a clutch for the backing pad, preventing additional strain on the foam pad when it is not in direct contact with the surface.

Electronic Speed Regulator

The speed regulator on the handle is practical and easy to use, and can be adjusted during operation without interrupting the polishing process.

Switch Lock

By pressing the button on the left side of the handle during polishing, the on/off switch is locked, allowing the operator to freely change hand positions while the tool is in operation.

Design

Attention to detail is not limited to the innovative and attractive design. Modern lines and exceptional technical quality combine with details resulting from meticulous research, focused on maximum operator comfort.

What's included in the BAS Kit

• BigFoot LHR15ES Random Orbital Polisher (Ø125mm - Ø5"-15mm orbit) (LHR15ES)
• D-A COARSE Polishing Compound 250ml (9.DACOARSE)
• D-A FINE Polishing Compound 250ml (9.DAFINE)
• COARSE Wool Pad Ø130mm (9.NW130H)
• D-A FINE Foam Pad Ø130-150mm - Ø5"-6" (9.DA150M)
• Blue Microfiber Cloth (9.BF9050)
• Yellow Microfiber Cloth (9.BF9060)
• Cable Clamp (9.Z1024)

The Ø15mm orbit and Ø125mm RUPES backing pad make this random orbital polisher particularly suitable for curved surfaces. The LHR15ES's orbit, shorter than its "bigger sister" LHR21ES, is combined with a higher rotation, which gives the LHR15ES cutting power equivalent to the LHR21ES, despite the smaller orbit. With Ø130/150mm BigFoot foam pads, perfect balance, and vibration-free operation, the LHR15ES is a true gem and an essential item in any detailer's kit.

Random Orbital Movement

The backing pad follows an orbit (the amplitude of which depends on the distance between the rotating axis of the motor shaft and the central axis of the pad) and rotates freely on its own axis. The speed and direction of rotation vary due to the centrifugal force of the eccentric movement and friction with the surface. This random orbital movement represents the best balance between effectiveness and quality of surface treatment.

Elegant Design

The RUPES R&D and Design departments paid special attention to the design and ergonomics of the BigFoot polishers. The perfectly balanced body, practical grip, quiet operation, and minimal vibration are some of the features that make the BigFoot system the most versatile and sought-after on the market.

Anti-Rotation Shroud

The dual-function shroud protects the operator from moving parts and acts as a clutch for the backing pad, preventing additional strain on the foam pad when it is not in direct contact with the surface.

Electronic Speed Control

The speed regulator on the handle is practical and easy to use, and can be adjusted during operation without interrupting the polishing process.

Switch Lock

By pressing the button on the left side of the handle during polishing, the on/off switch is locked, allowing the operator to freely change hand positions while the tool is in operation.

Design

Attention to detail is not limited to the innovative and attractive design. The modern lines and exceptional technical quality combine with details resulting from meticulous research, focused on maximum operator comfort.

What's included in the LUX Kit

• BigFoot LHR15ES random orbital polisher (Ø125mm - Ø5"-15mm orbit) (LHR15ES)
• D-A COARSE polishing compound 250ml (9.DACOARSE)
• D-A FINE polishing compound 250ml (9.DAFINE)
• UNO PROTECT One-Step Polish & Sealant 250ml (9.PROTECT)
• COARSE wool pad Ø130mm (9.XW130H)
• FINE wool pad Ø130mm (9.NW130H)
• D-A COARSE foam pad Ø130-150mm - Ø5"-6" (9.DA150H)
• D-A FINE foam pad Ø130-150mm - Ø5"-6" (9.DA150M)
• Blue microfiber cloth (9.BF9050)
• Yellow microfiber cloth (9.BF9060)
• White microfiber cloth (9.BF9070)
• Claw pad (9.BF7001)
• Cable clamp (9.Z1024)
• BigFoot apron (9.Z868)
• BigFoot silver tool bag (9.Z1169/BF)

With its large Ø21mm orbit and RUPES Ø150mm backing pad, the LHR21ES electric random orbital polisher is perfect for working on large surface areas. Perfectly balanced and combined with Ø150/180mm BigFoot foam pads, it guarantees fast cutting and an impeccable finish.

Random Orbital Movement

The backing pad follows an orbit (the amplitude of which depends on the distance between the drive shaft's axis of rotation and the pad's central axis) and rotates freely on its own axis. The speed and direction of rotation vary due to the centrifugal force of the eccentric movement and friction with the surface. This random orbital movement represents the best balance between effectiveness and quality of surface treatment.

Elegant Design

The RUPES R&D and Design departments have paid special attention to the design and ergonomics of BigFoot polishers. The perfectly balanced body, practical grip, quiet operation, and minimal vibration are some of the features that make BigFoot the most versatile and sought-after system on the market.

Anti-Spinning Shroud

The dual-function shroud protects the operator from moving parts and acts as a clutch for the backing pad, preventing additional strain on the foam pad when it is not in direct contact with the surface.

Electronic Speed Control

The speed controller on the handle is practical and easy to use, and can be adjusted during operation without interrupting the polishing process.

Switch Lock

By pressing the button on the left side of the handle during polishing, the on/off switch is locked, allowing the operator to freely change hand positions while the tool is in operation.

Design

Attention to detail is not limited to the innovative and attractive design. Modern lines and exceptional technical quality combine with details resulting from meticulous research, focused on maximum operator comfort.